How to Fly a Drone

It can be quite a confusing situation when you buy a drone and the instructions provided in the user’s manual are not clear enough for you to understand how to assemble and fly your drone.  The majority of people go through different problems when dealing with their first drone.  Apart from choosing and buying a perfect quadcopter or drone, drone flying is something which can only be achieved by virtue of patience and does have a learning curve.  So if you are getting ready to learn the art of drone flying or to hone your skills to perform intricate aerial stunts or videography then you will find this article useful, as without any prejudice regarding the type of drone you have bought the simple instructions discussed here will help you to learn some basic facts about how to fly your drone.

Selecting a Perfect Drone

If you have just discovered the hobby of drone flying then finding a perfect drone can be quite frustrating as there are many models available on the market ranging from small toy-sized drones to large state-of-the-art drones with sophisticated technology.  These drones can be controlled by either the remote control devices provided with them or by using iOS or Android devices depending on the level of technology used in their manufacture.

Beginners are recommended to opt for any of the models below one hundred dollars so that they can learn the basic concepts related to drone flying without the fear of destroying an expensive piece of machinery due to accidental crashes and collisions.  The majority of experts believe that controlling a quadcopter is quite easy for beginners as compared to other types of drone available.

Some drones come in ready-to-fly packages while some other models require assembling.  If you have the ability to tinker with simple tools then you should opt for latter. Otherwise, opt for a fully assembled drone which only requires the batteries to be charged to make it ready for aerial operations.

Preflight Checklist for the Drone

In order to avoid any untoward accidents during drone flying it is always better that you should go through a preflight checklist so that you can keep your drone safe during the flying session.  In order to keep things simple for the largest number of people we will assume that you have bought a drone with a camera system as the majority of average models come fitted with such systems.  Before the preflight checklist make sure that all the assembling required by your drone is complete.  This will ensure that you have the maximum amount of time possible for flying your drone rather than wasting it for getting ready to fly.  The step-by-step preflight checklist is as follows:

  • Check the status of the Micro SD card by seeing whether it is inserted in its slot or not.
  • Make sure to check the batteries used in the remote control device.
  • Make sure that the onboard batteries are fully charged and are secured safely.
  • Check the propellers and make sure they are free and running.
  • Make a visual inspection of the drone to make sure there are no loose parts.
  • Check all the screws are in position and replace or tighten them if required.
  • Turn on the onboard transmitter and check the LED battery’s on/off status.
  • If your drone requires calibration or satellite lock then wait for the prescribed time period.
  • Ensure that the throttle on the remote control is at the lowest level.
  • When you are ready to pilot your drone, turn on the remote control, back away 4 to 5 feet or the required safe distance while keeping the drone in your direct line of vision and push the throttle to start the required thrust in the propellers to lift the drone.

Controlling Flight of the Drone

In order to take control of the flight of your drone it is necessary that you should know how to use the throttle and maneuvering stick to control the direction of flight.  To learn the proper use of the throttle and direction control simultaneously it is advised that you should first start flying your drone just about three feet from ground.  This will ensure that if there is an accident due to an error on the control side, the drone will not suffer too much damage. The basic flying practice is as follows:

  • Push the throttle to gradually increase the propeller speed and stop.
  • Practice this routine until you have mastered the sensitivity of the throttle.

Once you are quite comfortable with the use of the throttle then you can carry on practicing flying your drone at a small height above ground level to practice direction control.

  • Push the throttle of the remote control in a phased manner to keep the drone stable in a hovering position.
  • Learn to move the drone by using the control stick in forward, backwards and sideways positions.
  • When you want to land your drone gradually move back the throttle to its original position.
  • If by any chance the drone starts to rotate during landing or in flight, adjust the yawing and keep the front end of the drone facing your side.

Once you have full control of the throttle as well as the driving stick then you can gradually increase the flying height of your drone.   After learning the basic techniques related with drone flying you can start practicing different types of stunts or using a controlled flight routine for aerial videography or photographs.


Flying a drone can be a very scintillating experience if you know how to keep your drone in control.  On the other hand if you fly a drone without the required experience then chances are that you may destroy your drone and hurt yourself or somebody else.

While learning how to fly your drone, try to practice in open space rather than indoors.  Once you have full control over your drone then you can try flying it in enclosed spaces like inside of your apartment or office cubicle.

Experts suggest that drone flying should be practiced in open parks or fields with grass so that if there is any accident and you want to land your drone you can safely do so by landing it on the grass to provide a cushioned landing.

Leave a Comment

Your email address will not be published. Required fields are marked *